AB56-ASA1,392,1918 j. The design-builder has not been disciplined under a professional license in
19any jurisdiction in the previous 10 years.
AB56-ASA1,392,2220 k. No design professional employed by the design-builder or a member or that
21the design-builder will contract with has been disciplined in any jurisdiction under
22a license that is currently in use.
AB56-ASA1,392,2423 3. Information about bid procedures and the proposed project, including all of
24the following:
AB56-ASA1,392,2525 a. The type of contract to be awarded.
AB56-ASA1,393,1
1b. The selection criteria for recommendation of design-builders for phase 2.
AB56-ASA1,393,22 c. Project requirements, including a scope of work statement and a schedule.
AB56-ASA1,393,33 d. The required completion date of the project.
AB56-ASA1,393,44 e. A description of requirements for the technical proposal for the project.
AB56-ASA1,393,135 (b) The office shall advertise the request for qualifications by publication of a
6class 1 notice, as defined in s. 985.07 (1), in the official state newspaper and on the
7department's Internet site. The office may place similar notices in publications likely
8to inform potential bidders of the project. The office shall issue a request for
9qualifications or provide information as to where the request for qualifications may
10be obtained to any person, without regard to the qualifications of the person. The
11office shall include in all advertisements under this paragraph the location and scope
12of work, the amount of bid guarantee required, the date, time, and place of bid or
13proposal opening, and the date when and place where plans will be available.
AB56-ASA1,393,1814 (c) The technical review committee shall certify at least 2 but not more than 4
15design-builders as qualified responsible bidders. If the office does not receive at
16least 2 responses to the request for qualifications or if the technical review committee
17certifies only one design-builder as a qualified responsible bidder, the office may
18re-advertise or cancel the project.
AB56-ASA1,393,20 19(6) Request for proposals. (a) The office shall prepare a request for proposals
20for each design-build contract that includes all the following:
AB56-ASA1,393,2221 1. The name, title, address, and telephone numbers of persons to whom
22questions concerning the proposal should be directed.
AB56-ASA1,393,2523 2. The procedures to be followed for submitting proposals, including how
24proposals must be delivered, the date and time by which they must be received, and
25the name and address of the person who is to receive them.
AB56-ASA1,394,1
13. The date and time of the pre-proposal conference, if any.
AB56-ASA1,394,32 4. A requirement that a technical proposal and a cost proposal be submitted in
3separate sealed proposals at the same time.
AB56-ASA1,394,54 5. A clear description of the scope of all design, engineering, and construction
5work.
AB56-ASA1,394,66 6. The criteria for evaluating proposals and their relative weight, if applicable.
AB56-ASA1,394,97 7. The design criteria package, including a description of drawings,
8specifications, or other information to be submitted with the proposals, which shall
9allow the design-builder to use innovative projects meeting the criteria.
AB56-ASA1,394,1010 8. The project schedule and budget limits, if any.
AB56-ASA1,394,1111 9. The proposed terms and conditions of the contract.
AB56-ASA1,394,1312 10. Requirements relating to performance bonds, payments bonds, and
13insurance.
AB56-ASA1,394,1414 11. Amount of stipend, if any.
AB56-ASA1,394,1515 12. The procedures for awarding a contract.
AB56-ASA1,394,1716 13. A process for the technical review committee to review and accept
17alternative technical concepts and value engineering change proposals.
AB56-ASA1,394,2118 14. A requirement that the design-builder perform not less than 30 percent of
19the construction services under the contract with labor provided by employees of the
20design-builder or member and equipment owned or rented by the design-builder or
21member.
AB56-ASA1,394,2222 15. Any other information the office determines is necessary.
AB56-ASA1,394,2523 (b) The technical review committee shall evaluate each technical proposal,
24which may include a confidential interview, and shall assign points in accordance
25with the request for proposals and subject to all of the following:
AB56-ASA1,395,4
11. For a project that will be awarded as either a low bid design-build contract
2or a fixed price variable scope design-build contract, the technical review committee
3shall determine whether technical proposals are responsive to the request for
4proposals without ranking or scoring the proposals.
AB56-ASA1,395,145 2. For a project that will be awarded as a best value design-build contract, the
6technical review committee shall determine whether technical proposals are
7responsive to the request for proposals and score each responsive technical proposal
8as required by the request for proposals. The technical review committee may award
9not more than 20 percent of the points awarded to a technical proposal based on the
10design-builder's qualifications and ability to design, contract, and deliver the project
11in accordance with any deadline established in the request for proposals. The
12technical review committee may award a technical proposal not more than 55
13percent of the maximum number of combined points that may be awarded to a
14technical proposal and cost proposal.
AB56-ASA1,395,1815 (c) The office shall allow design-builders to include alternative technical
16concepts and value engineering changes in their proposals by describing the process
17for submission and evaluation of alternative technical concepts and value
18engineering changes in the request for proposals.
AB56-ASA1,395,2419 (d) The technical review committee may not consider a proposal responsive
20unless the proposal includes a conceptual design, critical path method, bar schedule
21of the work to be performed or similar schematic, design plans and specifications,
22technical reports, and all other information required by the request for proposals.
23The technical review committee may not consider any price or fee included in the
24technical proposal.
AB56-ASA1,396,4
1(e) The office shall notify the design-builder for each proposal that is
2determined to be responsive under par. (b) that the design-builder may submit a cost
3proposal under par. (7). The office shall reject all proposals that are determined to
4be nonresponsive under par. (b).
AB56-ASA1,396,9 5(7) Cost proposals. (a) Design-builders notified under sub. (6) (e) may submit
6a cost proposal and the proposal shall include a fixed cost of design, engineering, and
7construction services prepared by a design professional that contains all design,
8engineering, construction, and quality assurance and quality control costs of the
9project.
AB56-ASA1,396,1510 (b) The technical review committee may open cost proposals only after the
11technical proposals have been reviewed as provided in sub. (6). At the time and place
12specified in the request for proposals, the technical review committee shall open cost
13proposals, read the proposals aloud, and, for a project that will be awarded as a best
14value design-build contract, make public the committee's scoring of the technical
15proposals.
AB56-ASA1,396,1716 (c) Following a review of cost proposals, the department may issue a notice of
17intent to award a contract, subject to all of the following:
AB56-ASA1,396,2018 1. For a low bid design-build contract, the contract shall be awarded to the
19qualified responsible bidder that submitted a responsive technical proposal and also
20submitted the lowest responsive cost proposal.
AB56-ASA1,396,2521 2. For a fixed price variable scope design-build contract, the contract shall be
22awarded to the qualified responsible bidder that submitted a responsive technical
23proposal and that submitted a responsive cost proposal that provides the maximum
24amount of services for the maximum fixed price set by the office or for an amount that
25is less than the maximum fixed price.
AB56-ASA1,397,12
13. For a best value design-build contract, the contract shall be awarded to the
2qualified responsible bidder with the highest adjusted score, which shall be
3calculated by adding the bidder's technical proposal score to the bidder's cost
4proposal score. The technical review committee shall award the lowest qualified
5responsible bidder the maximum number of points that may be awarded to a cost
6proposal under the request for proposals, but not less than 45 percent and not more
7than 75 percent of the maximum number of combined points that may be awarded
8to a technical proposal and cost proposal. For each remaining qualified responsible
9bidder, the technical review committee shall calculate the score for the cost proposal
10by reducing the maximum number of points that may be awarded to the cost proposal
11by at least 1 percent for each percentage point by which the cost proposal exceeds the
12lowest cost proposal.
AB56-ASA1,397,2113 (d) Following a review of cost proposals, the office may reject all proposals. If
14the office rejects all proposals or does not execute a contract after issuing an intent
15to award a contract under par. (c), the office may reissue the request for proposals
16and allow only the qualified responsible bidders originally notified under sub. (6) (e)
17to submit new proposals. The office may pay a reasonable stipulated fee to each
18design-builder that provides a responsive but unsuccessful proposal in response to
19the reissued request for proposals. If the reissued request for proposals specifies a
20maximum fixed price, the office may not award a stipend to a design-builder whose
21proposal exceeds that price.
AB56-ASA1,397,2422 (e) Not less than 5 working days prior to executing a design-build contract, the
23department shall provide notice to each unsuccessful qualified responsible bidder
24that a notice of intent to award a contract has been issued.
AB56-ASA1,398,3
1(f) The department and the technical review committee shall maintain the
2confidentiality of information provided by design-builders as required by s. 84.01
3(32).
AB56-ASA1,398,4 4(8) Contract award. (a) In this subsection:
AB56-ASA1,398,75 1. “Construction services” means work necessary to construct a project,
6including trucking services and materials purchased regardless of whether the
7materials are installed by the design-builder.
AB56-ASA1,398,108 2. “Specialty services” means work related to sanitary sewer systems, water
9main systems, staking, electrical, landscaping and erosion control, traffic control,
10signing, pavement marking, fencing, and other work identified by the office.
AB56-ASA1,398,1511 (b) No later than 10 days following the issuance of a notice of intent to award
12a design-build contract, the office shall verify that the design-builder will perform
13not less than 30 percent of the construction services under the contract with labor
14provided by employees of the design-builder or member and equipment owned or
15rented by the design-builder or member.
AB56-ASA1,398,1816 (c) The design-builder shall submit to the office in the form prescribed by the
17office documentation of the construction services the design-builder or members will
18perform and the dollar value of the services.
AB56-ASA1,399,219 (d) The office shall calculate the percentage of total construction services
20identified in the contract to be performed by the design-builder or members by
21subtracting the value of specialty services to be performed from the total contract
22amount and dividing the dollar value of construction services to be performed by the
23design-builder or members by the difference. If the value of construction services
24to be performed by the design-builder or members is less than 30 percent of the value

1of all construction services required under the contract, the office shall cancel the
2contract award.
AB56-ASA1,399,8 3(9) Project delivery. An individual identified in a response to a request for
4qualifications or in a technical proposal may be replaced by a design-builder if the
5office determines that the new individual meets the qualifications described in the
6response to the request for qualifications or in the technical proposal and that the
7individual's qualifications are at least equal to the qualifications of the individual
8being replaced.
AB56-ASA1,399,11 9(10) Liability. (a) Nothing in this section shall be construed as relieving a
10design-builder of 3rd-party liability or liability for loss or damage to property of the
11state or a county or municipality.
AB56-ASA1,399,1312 (b) All design services, including architectural and engineering services,
13provided under a design-build contract are services and not products.
AB56-ASA1,399,16 14(11) Stipulated fee. (a) The department shall award a stipulated fee of not
15less than three-tenths of 1 percent of the department's estimated cost of design and
16construction as follows:
AB56-ASA1,399,2017 1. To each qualified responsible bidder that provides a responsive but
18unsuccessful proposal when the office issues a notice of intent to award a contract.
19If the request for proposals specifies a maximum fixed price, the office may not award
20a fee to a proposal that exceeds the maximum fixed price.
AB56-ASA1,399,2221 2. To all qualified responsible bidders that provide a responsive proposal, if the
22office does not issue a notice of intent to award a contract.
AB56-ASA1,399,2423 3. To all qualified responsible bidders if the office cancels the solicitation before
24the technical review committee reviews technical proposals.
AB56-ASA1,400,4
1(b) The department shall pay the fee to each qualified responsible bidder under
2par. (a) no later than 90 days after the department issues a notice of intent to award
3a contract, determines that it will not issue a notice of intent to award a contract, or
4cancels the solicitation.
AB56-ASA1,400,95 (c) In consideration for paying the fee, the department may use work product
6contained in an unsuccessful proposal in connection with any proposed or awarded
7design-build project without making any additional compensation to the
8design-builder. If an unsuccessful design-builder waives the stipulated fee, the
9department may not use work product in the design-builder's unsuccessful proposal.
AB56-ASA1,400,11 10(12) Rules. The department may promulgate rules necessary to implement
11this section.
AB56-ASA1,400,18 12(13) Appeals. (a) Any person aggrieved and directly affected by a decision of
13the office to issue a request for qualifications or a request for proposals under this
14section shall be entitled to judicial review of the decision as provided in chapter 227,
15subject to the procedural requirements of s. 227.53 (1). A person shall be considered
16a person aggrieved and directly affected by a decision of the office if any of the
17following apply to a request for qualifications or a request for proposals issued by the
18office under this section:
AB56-ASA1,400,2019 1. The request does not include qualifications, requirements, or other items
20required under this section.
AB56-ASA1,400,2221 2. The request does not comply with procedural requirements under this
22section.
AB56-ASA1,400,2323 3. The request contains material errors or omissions.
AB56-ASA1,400,2524 4. The request contains material discrepancies, deficiencies, or ambiguities
25that prevent a person from submitting a responsive proposal.
AB56-ASA1,401,2
15. The request indicates a bias against or preference for a specific
2design-builder.
AB56-ASA1,401,33 6. The request exceeds the department's authority.
AB56-ASA1,401,94 (b) Any person aggrieved and directly affected by a decision of the office to issue
5a notice of intent to award a contract under this section shall be entitled to judicial
6review of the decision as provided in chapter 227, subject to the procedural
7requirements of s. 227.53 (1). A person shall be considered a person aggrieved and
8directly affected by a decision of the office if any of the following apply to a notice of
9intent to award a contract under this section:
AB56-ASA1,401,1110 1. The design-builder that received the notice of intent to award a contract was
11improperly certified as a qualified responsible bidder.
AB56-ASA1,401,1312 2. A mathematical error was made in scoring any of the proposals that resulted
13in an improper intent to award a contract.
AB56-ASA1,401,1614 3. There is evidence of collusion or fraud involving either the design-builder
15who received the notice of intent to award a contract or a member of the technical
16review committee.
AB56-ASA1,401,1717 4. There is evidence of bias of a member of the technical review committee.
AB56-ASA1,401,2218 5. There is evidence that a member of the technical review committee has a
19conflict of interest because the committee member, a member of his or her immediate
20family, as defined in s. 19.42 (7), or any organization or business with which the
21member is associated, as defined in s. 19.42 (2), may benefit from the intent to award
22a contract.
AB56-ASA1,402,223 6. The technical proposal or cost proposal submitted by the design-builder who
24received the notice of intent to award a contract is not responsive to the request for
25proposals, contains conditions or qualifications not provided for in the request for

1proposals, or does not assign costs to all services identified in the technical proposal
2or is otherwise materially unbalanced.
AB56-ASA1,402,123 (c) If the office prevails upon judicial review, following any protest and
4appellate court proceedings, the office shall be entitled to recover all costs and
5charges included in the final order or judgment, excluding attorney fees. Upon
6payment of costs and charges by the protester, the bond shall be returned. If the
7protesting party prevails, the protesting party shall be entitled to recover from the
8office all costs and charges included in the final order or judgment, excluding
9attorney fees. The entire amount of the bond shall be forfeited if the hearing officer
10determines that a protest was filed for a frivolous or improper purpose, including but
11not limited to the purpose of harassing, causing unnecessary delay, or causing
12needless cost for the office or parties.
AB56-ASA1,402,18 13(14) Deliverables. (a) No later than 3 months after the effective date of this
14section .... [LRB inserts date], the office shall prepare a report that establishes a
15program structure for delivering projects as required under this subsection. The
16report shall specify the types of highway improvement projects to be considered and
17procedures and timelines for the bid process. The office may not designate a highway
18improvement project as a design-build project prior to the completion of the report.
AB56-ASA1,402,2319 (b) No later than 6 months after the effective date of this section .... [LRB inserts
20date], the office shall prepare a design-build procurement manual that incorporates
21the requirements under this subsection and any applicable requirements under
22federal law. The manual shall be created by a committee that includes all of the
23following members:
AB56-ASA1,402,2424 1. The director.
AB56-ASA1,403,3
12. Two employees of the department who represent the division of the
2department responsible for transportation project development and who each have
3not less than 5 years of experience in the transportation construction industry.
AB56-ASA1,403,64 3. One person representing a state association of transportation architectural,
5engineering, or design companies to be nominated by the governor and appointed
6with the advice and consent of the senate.
AB56-ASA1,403,97 4. One person representing a state association of transportation construction
8companies to be nominated by the governor and appointed with the advice and
9consent of the senate.
AB56-ASA1,403,1310 5. One person representing a national trade group with a design-build
11certification program and experience in assisting states with the implementation of
12a design-build program to be nominated by the governor and appointed with the
13advice and consent of the senate.
AB56-ASA1,403,2214 (c) No later than December 31, 2026, the office shall submit a report the joint
15committee on finance and the senate and assembly standing committees having
16jurisdiction over transportation matters summarizing observations of the process
17utilized for alternative project delivery methods and describing the effectiveness of
18the alternative project delivery methods contracting procedures. The report shall
19include discussion on scope of work, history of projects selected, evaluation criteria,
20selection process, contract administration, work progression, time and cost
21comparisons between the traditional contracting method and alternative delivery
22methods, claims, and changes.
AB56-ASA1,404,323 (d) No later than 6 months after receipt of the report required under par. (c),
24the joint committee on finance shall determine whether the alternative project
25delivery pilot program was successful in providing the department with additional

1tools that allow innovation, reduced project completion time, cost certainty, or
2reduced cost or other advantages or benefits and shall make a recommendation to
3the legislature as to whether the pilot program should be made permanent.
AB56-ASA1,1082 4Section 1082 . 84.59 (6) of the statutes is amended to read:
AB56-ASA1,404,195 84.59 (6) The building commission may contract revenue obligations when it
6reasonably appears to the building commission that all obligations incurred under
7this section can be fully paid from moneys received or anticipated and pledged to be
8received on a timely basis. Except as provided in this subsection, the principal
9amount of revenue obligations issued under this section may not exceed
10$4,055,372,900 $4,197,627,500, excluding any obligations that have been defeased
11under a cash optimization program administered by the building commission, to be
12used for transportation facilities under s. 84.01 (28) and major highway projects for
13the purposes under ss. 84.06 and 84.09. In addition to the foregoing limit on principal
14amount, the building commission may contract revenue obligations under this
15section as the building commission determines is desirable to refund outstanding
16revenue obligations contracted under this section, to make payments under
17agreements or ancillary arrangements entered into under s. 18.55 (6) with respect
18to revenue obligations issued under this section, and to pay expenses associated with
19revenue obligations contracted under this section.
AB56-ASA1,1082m 20Section 1082m. 85.0203 of the statutes is created to read:
AB56-ASA1,405,2 2185.0203 Mileage-based fees. (1) The department shall expend not more
22than $2,500,000 to enter into a contract with a firm for the study of, and preparation
23of a report regarding, the policies, procedures, and operations needed to implement
24mileage-based fees and for the preparation of a traffic and revenue analysis
25associated with these fees. No later than December 1, 2022, the firm conducting the

1study and preparing the analysis under this subsection shall report its findings to
2the department and the legislature under s. 13.172 (2).
AB56-ASA1,405,5 3(2) No later than January 1, 2023, the department shall submit a
4recommendation on an implementation plan for a mileage-based fee to the joint
5committee on finance.
AB56-ASA1,405,9 6(3) The department may implement a mileage-based fee only if the joint
7committee on finance approves the plan under sub. (2). If the committee modifies and
8approves the proposed plan, the department may implement a mileage-based fee
9only as modified by the committee.
AB56-ASA1,405,13 10(4) If the joint committee on finance approves a mileage-based fee plan, the
11department shall create a division of innovative transportation finance systems that
12shall administer any mileage-based fee plan imposed under this section. The
13division shall report directly to the secretary of transportation.
AB56-ASA1,1082o 14Section 1082o. 85.061 (3) (a) (intro.) of the statutes is amended to read:
Loading...
Loading...